Petcube SupportPetcube Play 2 | Petcube Bites 2Using motion and sound detection on Petcube Bites 2 and Petcube Play 2

Using motion and sound detection on Petcube Bites 2 and Petcube Play 2

If you are not using Petcube Care cloud-based video storage service, the Petcube app can send push notifications to your smartphone whenever motion or sound is detected on your Petcube.

To enable push notifications:

  1. Open the Petcube app.
  2. Go to the camera profile, tap the 'Settings' wheel in the upper right corner if you use Android or tap the ‘Play’ icon if you use iOS (fig 4.16.1) then tap ‘Settings’ in the upper right corner (fig 4.16.2).
  3. Select ‘Notifications’ (fig 4.16.3).
  4. Turn 'Motion Detection' and 'Sound Detection' options On (fig 4.16.4).

You can also adjust the sensitivity of the motion and sound detection sensors by moving the ‘Motion sensitivity’ slider (fig 4.16.5).

Keep in mind that in order to be able to change the settings on your Petcube, it needs to be in online standby mode (steady white light).

If you are using Petcube Care cloud history service, the Petcube app will record videos triggered by motion and sound detection and you can configure push notifications to be sent as soon as new video recordings are available.

Was this article helpful?

Help us improve our Support Center