Confirm your region to see content that is specific to your location and to shop in your currency.

I don't see my home Wi-Fi network

This problem can occur if you are trying to connect your Petcube to either a 5GHz frequency range network or a hidden network.

Unfortunately, Petcube Bites 2 Lite, Petcube Cam, Petcube Bites, Petcube Play and the original Petcube Camera don't work with 5GHz networks, but since most routers support both 5GHz and 2.4GHz frequencies at the same time, you should not have any problem adding the 2.4GHz channel.

If you have a hidden network, you will be prompted to enter your network SSID and password manually.

If you use an unhidden 2.4GHz network but it still doesn't show up in the list of options, turn your Petcube off and back on, wait up to 1 minute until it boots up and starts blinking and start the setup process over again.

Was this article helpful?

Help us improve our Support Center